Copper patch cords is one of the most widely used products in current network communication, and it is a crucial link that can directly affect the stability and transmission rate of the entire network.ADTEK’s patch cords are designed to provide excellent performance in a variety of network environments.
Copper patch cords is one of the most widely used products in current network communication, and it is a crucial link that can directly affect the stability and transmission rate of the entire network.ADTEK’s patch cords are designed to provide excellent performance in a variety of network environments.
ADTEK Science | What is data center cabling made of? Data center cabling is composed of two parts: data center room cabling and support space, and the data center room is divided into several different levels of wiring zones, including main wiring zone, intermediate wiring zone, horizontal wiring zone, regional
Apply to all devices with RJ45 interface, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, etc.
| Product Type | Category | Conductor Type | Shielding Type | Wire Gauge(±0.008mm) | O.D.(±0.3mm) | |||
| Cat5e | Solid | U/UTP | 24AWG(1/0.51) | 5.4 | ||||
| F/UTP | 24AWG(1/0.51) | 6.2 | ||||||
| SF/UTP | 24AWG(1/0.51) | 6.6 | ||||||
| Stranded | U/UTP | 24AWG(7/0.20 or 0.18) | 5.4 | |||||
| 28AWG(7/0.12) | 3.8 | |||||||
| F/UTP | 26AWG(7/0.16) | 5.8 | ||||||
| SF/UTP | 26AWG(7/0.16) | 5.8 | ||||||
| Wring Scheme | T568A/T568B | |||||||
| Connectors | RJ45 | |||||||
| Conductor Material | Pure Bare Copper | |||||||
| Sheath Material | PVC、LSZH | |||||||
| Electrical Characteristics | Max. DC Resistance 20℃ | Ω/km | 66Ω | |||||
| Max. DC Conductor Resistance Unbalance | % | 2.5 | ||||||
| Mutual Capacitance | nF/100m | 5.6 | ||||||
| Characteristic Impedance(1-100MHz) | Ω | 100±15% | ||||||
| Bandwidth | MHz | 100 | ||||||
| Data Rate Support | Mbps | 10/100/1000 | ||||||
| Operating Temperature | –20°C ~ +60°C（-4~140℉） | |||||||
| Physical Properties | Insulation | Tensile Strength(before aging) | Kgf/mm² | >1.68 | ||||
| Elongation(before aging) | % | >300 | ||||||
| Sheath | Tensile Strength(before aging) | Kgf/mm² | >1.41 | |||||
| Elongation(before aging) | % | >100 | ||||||
| Others | Conductor Resistance 20℃ | Ω/km | <93.8 | |||||
| Insulation Shrinkback | 121℃x1hr | |||||||
| Insulation Cold Bend | -20℃x4hr | |||||||
| Sheath Cold Bend | -20℃x4hr | |||||||
ADTEK specializes in the development and production of 9/125um LC/APC Fiber Pigtails, only one end has a connector, while the
ADTEK’s MTP®/ MPO fiber optic patch cord series trunk cable solutions offer an efficient way to quickly install large quantities
Adtek’s The eXtreme High-Density (XHD) Patch Panel with MMC connectors is a cutting-edge solution tailored to meet the demands of
Shenzhen ADTEK Technology Co., Ltd., founded in 2007, is a national high-tech enterprise that integrates R&D, manufacturing, and sales. As a leading provider of optical connectivity solutions, ADTEK brings over 18 years of design and manufacturing experience, specializing in customized fiber optic connectivity products for domestic and international telecom operators, cloud service providers, equipment manufacturers, and system integrators.
